foaming

Buying, building and using brewing equipment and apparatus. Product reviews and questions.

Moderator: slothrob

Post Reply
dcos
Posts: 4
Joined: Mon Mar 08, 2010 4:04 pm

foaming

Post by dcos »

My 5 gal Cornelius keg foams more than I'd like. I have it in a mini fridge at about 32 degrees, serving pressure about 10, about 6 feet of serving hose. I get at least 1/4 to 1/2 glass of foam when I pour one. Anyone have any suggestions?
User avatar
jawbox
Imperial Stout
Imperial Stout
Posts: 528
Joined: Fri Oct 27, 2006 1:43 pm
Location: W. Dundee

Post by jawbox »

Whats the inside diameter of the tubing you are using? Are you using cobra taps or a regular faucet?
iMac 27", 3.4 GHz Intel Core i5, 8GB Ram, Mac OSX 10.12.6
iPhone 7+
iPad Pro 10.5
I like macs ;)
User avatar
jawbox
Imperial Stout
Imperial Stout
Posts: 528
Joined: Fri Oct 27, 2006 1:43 pm
Location: W. Dundee

Post by jawbox »

Here's a great pdf for you to read. There's a section on balancing your draft system.

Link
iMac 27", 3.4 GHz Intel Core i5, 8GB Ram, Mac OSX 10.12.6
iPhone 7+
iPad Pro 10.5
I like macs ;)
dcos
Posts: 4
Joined: Mon Mar 08, 2010 4:04 pm

Post by dcos »

I'm using Bevflex 200 tubing, not sure of the ID, but it's probably 1/4 inch. I have a regular faucet on it.
User avatar
slothrob
Moderator
Moderator
Posts: 1831
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston

tubing length and foam

Post by slothrob »

If it's actually 1/4" tubing, you need a longer run.

You can use this formula to calculate the length of tubing to use:

Length = (Pressure - (Height of tap from center of keg x 0.5) - 1) / Resistance

Resistance is about 0.7 psi/ft (0.4-0.85) for 1/4" i.d. and 1.8-2.7 for 3/16" i.d. plastic tubing.

If your tap is ~ 2 feet above the keg, for 10 psi you should need 12-25 feet of 1/4" tubing. For 3/16" tubing you should need 4-6 feet of line. No one ever seems to need the low end of those lengths and they sometimes need longer than the top end.

It's often suggested that you start with the longest suggested length of line required for your serving pressure, some even add 5 psi to their serving pressure for making the calculation. You can then trim if the beer is running too slow. The flow rate should be ~100-140 ounces per minute, so it should take 8-10 seconds to fill a pint.
BTP v2.0.* Windows XP
Post Reply