Cooler vs. Metal mash/lautertun

Buying, building and using brewing equipment and apparatus. Product reviews and questions.

Moderator: slothrob

Post Reply
Winkmc
Posts: 2
Joined: Wed Aug 15, 2001 5:53 pm

Cooler vs. Metal mash/lautertun

Post by Winkmc »

I am trying to decide which item to buy: a water cooler mash/lauter-tun (the standard "Rubbermaid, etc) or go with the metal one. Any input?
User avatar
Mesa Maltworks
Strong Ale
Strong Ale
Posts: 477
Joined: Tue Sep 11, 2001 11:16 pm
Location: Georgetown, Grand Cayman Island

Your choice...

Post by Mesa Maltworks »

A round cooler is best used with 5 gallon yields. The reason is that you can eliminate sparging since you can usually fit 7 or so gallons of water in the container. This technique has a number of advantages with the biggest being the reduction of tannin leaching that can result from high sparge temperatures or too much sparging.

This is a generality though because this recommendation does not work with high gravity ales that require lots of grain or when you are particularly concerned with the water to grist ratios. This will work for the most commonly home brewed styles which are tend to use English style, single infusion mashes.

If you plan to decoct or step mash, you will need a metal tun because you will have to directly heat it.

Eric Watson

"Ask not what your country can brew for you, ask what you can brew for your country !"
Post Reply