Page 1 of 1

Equipmnt loss not calcualting

Posted: Sat Feb 26, 2011 11:59 am
by EricT
Hello,

I'm pretty new to BTP, I have been using it for about a week now. I calibrated my equipment and included a .5 gallon equipment loss in my Boil Kettle. This is not being accounted for in the amount of water I need though. I have tryed changing it to 1 gallon to see if it changes the total amount of water needed and it does not. Anyone else have this issue or am I doing something wrong?

dead space

Posted: Sun Feb 27, 2011 6:53 pm
by slothrob
BTP only seems to account for dead space in the mash tun, not in the kettle.

Posted: Sun Feb 27, 2011 8:43 pm
by EricT
Ok, so I'm guessing everyone just adds that to their Mash Tun dead space. Thanks for the reply. Actually, I just changed the numbers in my mash tun in a recipe I am working on and it still isnt reflecting in total water needed.

dead volume

Posted: Tue Mar 01, 2011 5:33 am
by slothrob
It's going to be tough to add a dead space to the tun and get an exactly 0.5 gallon loss at the end of the boil due to expansion and contraction of wort volume with the temperature changes.

Perhaps this is an unsatisfying solution, but I target a larger volume as my Final Volume. So, if I knew that I would lose 0.5 gallons in the transfer from the kettle and wanted 5 gallons in the fermentor, I would consider 5.5 gallons my Final Volume.